PCBA Cleaning Solution T1008P TDS

Category：Water-based cleaner
The number of clicks：
Release date：2020-05-06
在線詢價

Detailed introduction

PCBA Cleaning Solution T1008P TDS

Part I Chemical products and company identification

chemical product

Product Name: TENICK T1008P

Recommended use: Used to remove PCBA flux residues and contaminants.

Company logo

Brand

Supplier (Company Name / Address / Phone)

TENICK Singapore

Supplier name：SINGAPORE TENICK CLEANING TECHNOLOGY PTE.LTD.

supplier address：50 Raffles Place,#34-04 Singapore Land Tower Singapore 048623 供應商電話：(65)65326932

Part II Hazard Overview

Category: This product is not classified as dangerous

Hazard label:

Health hazards: Excessive contact can cause eye, skin or respiratory irritation

Environmental hazards: No obvious hazards.

Part III Product Introduction

Explosion hazard: Non-flammable liquid, no explosion hazard.

TENICK is suitable for the thorough cleaning of precision electronic parts, electronic circuits, copper, aluminum welding parts, etc.

It is an environmentally friendly low foaming water based ultrasonic, spray cleaning type, non-combustible, non-explosive, mild odor, suitable for precision electronic parts, electronic circuits,

Water-based cleaning agent for copper and aluminum welding parts.

Part IV Product Performance

Project	Technical indicators
Exterior	Colorless to pale yellow transparent liquid
Boiling point (°C)	≥100℃
Relative specific gravity (20 ° C)	1.05±0.05
Relative specific gravity (20 ° C)	1.05±0.05
pH (10% DI water dilution)	8.5±0.5

Part 5 Product Features

1. Low foaming water-based environment-friendly type, non-flammable and explosive, with mild odor.

2. Strong cleaning ability, strong removal of various electronic glue residues and organic matter.

3. Contains anti-rust factor to prevent corrosion of precision devices.

4. It is easy to rinse without residue, and the device is bright as new after cleaning.

5. Long cleaning life, multiple use, safe and effective.

Part VI Usage and precautions

1. Stock solution: water (deionized water) = 1: 2 used after dilution.

2. The cleaning temperature range is 50 ± 5 °C. Cleaning time is 3 to 5 minutes.

3. Can not be mixed with any other cleaning solution.

4. Please refer to the MSDS data of this product for safe use instructions.

Part VII Storage matters

1. Warranty period: 1 year (sealed)

2, stored in a good place at room temperature, cool, dry, ventilated, avoid high temperature direct, the temperature is between 30% - 90%;

Previous：PCBA Water-based cleaner T1008P Msds

Next：No more

Product Center

News Center

Contact Us

Water-based cleaner

PCBA Cleaning Solution T1008P TDS

Category：Water-based cleaner

相關產品：

Crystal element cleaner

Camera module cleaner

ROC-600PCBA online cleaning mac

相關新聞：

Choose us

Contact

Online Message